Help - Tile Size in Grid

Unity Engine
1

Hi!

Before hand, I’am new to the forum so if this post is in the wrong thread I apologize before hand.

I’m starting to build a map with the 2D Isometric Z as Y tilemap and I can’t get my tile to match the grid, I know I have to play around with the Y valor but I can’t make it work :(.

My graphic is 5188634--515624--Grass Tile.png 44px(height) x 68px(width)

This is how it looks

5188634--515627--Sin título-3.jpg
5188634--515627--Sin título-3.jpg1920×1080 225 KB

hope someone can help me!

Thanks

2

You problably should make the x value and y value same, then go to the main sprite and change Pixels per unit to the value you declared.

3

That’s not correct, if you are in isometric dimensions, then you always are somewhat wide on X axis against the Y axis for your tiles if you tiles are as flat as he shows (not talking about pillars or buildings or something)

But yes, the pixels per unity might be wrong on your imported Spritesheet. It looks like you are importing them by default at 100 pixels per unit. It should be 68 of thats what your absolute tile-width is per tile, if thats variying, then you have to find out dependent on the tiles you are using.